EO-Y-011 (#6076)

Safety data sheet  Product description 

EO-Y-011 EO-cat.-no. 6076
Allround-Electronic-Flux ISO-9454: 2124 / DIN EN 61190-1-1
(J-STD-004): ORM1 WEEE / RoHS compliant

Description

EO-Y-011 based on halogen-substituted organic compounds offers the advantages of a very wide effective temperature range (approx. 150-290 ° C). It can, therefore, be used for numerous soldering and tinning processes, whereby practically all Sn / Pb alloys (also with the addition of Ag) and pure tin can be used. One of the preferred areas of application for EO-Y-011 is the tinning process in electronics, especially in the case of printed circuit boards. Strand tinning, as well as in cable assembly. In this process of hot metallization, the low-viscosity product can be applied to the boards by all known methods – e.g. by foaming, spraying, brushing, dipping, etc. Pre drying is not absolutely necessary, but it can favor the workflow. This special flux contains a UV activator, which enables precise application by UV detection. In practice, it has been shown that – if used correctly – the printed circuit boards soldered with this flux can be largely avoided. In general, assemblies soldered with flux, which are subsequently painted or cast, should first be checked for compatibility of the coating media with the flux residues. If aqueous FM systems are used, the IC test using needle adapters can also be impaired. Due to the high alcohol content, EO-Y-011 is quick-drying and the active ingredients contained are water-soluble. This also applies to the flux residues remaining after tinning, provided the product has not been subjected to extremely high thermal loads. The usual washing systems with warm water are used for post-cleaning, the effect of which is achieved by brushing or the like. can be supported.

Technical specifications:
Appearance: Light pink, fluorescent, transparent liquid
Density at 20 ° C: 0,84 – 0,92 g / ml
Halide concentration
(based on Cl-): 1 – 2 %
Activators: Carboxylic acids, carboxylic acid-halide complex
pH (1/10): 2 – 4
Solvents: Alcohol with water
Flash point: 12°C (c.c.)
VOC: 60%
Classified as per ISO-9454: 2123 (2.1.2.A)
UV detection: By UV activators, both flux and the residues can be detected
Storage: The shelf life with proper storage between 15 and
25 °C is 12 months.

Additional information on the ingredients (hazardous substances), safe handling, storage, transport, and disposal can be found in the current safety data sheet (SDS, SDS, MSDS).

Standard packaging: canister of 5 liters. Canister with one, twenty and thirty liters – also larger containers possible.